Masterstixs Sticker Care Guide

Getting the best from your Masterstixs custom vinyl decal is easy — just follow these simple steps.

Step 1 — Prep your surface

Clean the surface thoroughly with a cloth to remove any dust, oil, or moisture. A clean surface means a stronger bond and a longer-lasting decal.

Step 2 — Peel from the transfer sheet

Carefully peel your Masterstixs decal away from the transfer sheet at a low angle. Take your time — slow and steady gives you the cleanest lift.

Step 3 — Apply and squeegee

Position your decal and press it down firmly. Use a squeegee or credit card to smooth it out from the centre outward, pushing out any air bubbles as you go.

Step 4 — Remove the transfer tape

Slowly peel back the transfer tape at a low angle, leaving your Masterstixs decal perfectly in place.